Rand takes on the Constitution an objectivist perspective of the United States Constitution

Author and philosopher Ayn Rand has gathered a cult like following thanks to her bestselling novels We the Living, Anthem, The Fountainhead and Atlas Shrugged. Through Rand\u27s fictional writings she illustrates the principles of her philosophy objectivism. Objectivism employs five principles; objective reality, reason, self -interest, capitalism and individualism as the truths that govern the philosophy. Objectivists believe that their self-reliant philosophy holds the key to all life\u27s answers. This thesis examines the following question: what would the founder of objectivism Ayn Rand think about the U.S. Constitution? Sadly Ayn Rand passed away in 1982 and never expressed her full opinion on how she felt about the U.S. Constitution. However, using the five principles of the objectivist ideology, public interviews done with Ayn Rand during her life time, and the opinions expressed by Rand in her four fictional novels this thesis will deconstruct the U.S. Constitution and the Bill of Rights and then reconstruct them so that they concur with the objectivist philosophy. The purpose of this thesis is to inform readers of the objectivist philosophy and to highlight the differences and similarities between Ayn Rand\u27s beliefs and the Founding Fathers through the Constitution

A physical model of the high-frequency seismic signal generated by debris flows

We propose a physical model for the high‐frequency (>1 Hz) spectral distribution of seismic power generated by debris flows. The modeled debris flow is assumed to have four regions where the impact rate and impulses are controlled by different mechanisms: the flow body, a coarser‐grained snout, a snout lip where particles fall from the snout on the bed, and a dilute front composed of saltating particles. We calculate the seismic power produced by this impact model in two end‐member scenarios, a thin‐flow and thick‐flow limit, which assume that the ratio of grain sizes to flow thicknesses are either near unity or much less than unity. The thin‐flow limit is more appropriate for boulder‐rich flows that are most likely to generate large seismic signals. As a flow passes a seismic station, the rise phase of the seismic amplitude is generated primarily by the snout while the decay phase is generated first by the snout and then the main flow body. The lip and saltating front generate a negligible seismic signal. When ground properties are known, seismic power depends most strongly on both particle diameter and average flow speed cubed, and also depends on length and width of the flow. The effective particle diameter for producing seismic power is substantially higher than the median grain size and close to the 73rd percentile for a realistic grain size distribution. We discuss how the model can be used to estimate effective particle diameter and average flow speed from an integrated measure of seismic power

Multimorbidity as an important issue among women: results of gender difference investigation in a large population-based cross-sectional study in West Asia

Objectives: To investigate the impact of gender on multimorbidity in northern Iran. Design: A cross-sectional analysis of the Golestan cohort data. Setting: Golestan Province, Iran. Study population: 49 946 residents (age 40–75 years) of Golestan Province, Iran. Main outcome measures: Researchers collected data related to multimorbidity, defined as co-existence of two or more chronic diseases in an individual, at the beginning of a representative cohort study which recruited its participants from 2004 to 2008. The researchers utilised simple and multiple Poisson regression models with robust variances to examine the simultaneous effects of multiple factors. Results: Women had a 25.0% prevalence of multimorbidity, whereas men had a 13.4% prevalence (p<0.001). Women of all age-groups had a higher prevalence of multimorbidity. Of note, multimorbidity began at a lower age (40–49 years) in women (17.3%) compared with men (8.6%) of the same age (p<0.001). This study identified significant interactions between gender as well as socioeconomic status, ethnicity, physical activity, marital status, education level and smoking (p<0.01). Conclusion: Prevention and control of multimorbidity requires health promotion programmes to increase public awareness about the modifiable risk factors, particularly among women

Measuring Basal Force Fluctuations of Debris Flows Using Seismic Recordings and Empirical Green's Functions

We present a novel method for measuring the fluctuating basal normal and shear stresses of debris flows by using along‐channel seismic recordings. Our method couples a simple parameterization of a debris flow as a seismic source with direct measurements of seismic path effects using empirical Green's functions generated with a force hammer. We test this method using two large‐scale (8 and 10 m³) experimental flows at the U.S. Geological Survey debris‐flow flume that were recorded by dozens of three‐component seismic sensors. The seismically derived basal stress fluctuations compare well in amplitude and timing to independent force plate measurements within the valid frequency range (15–50 Hz). We show that although the high‐frequency seismic signals provide band‐limited forcing information, there are systematic relations between the fluctuating stresses and independently measured flow properties, especially mean basal shear stress and flow thickness. However, none of the relationships are simple, and since the flow properties also correlate with one another, we cannot isolate a single factor that relates in a simple way to the fluctuating forces. Nevertheless, our observations, most notably the gradually declining ratio of fluctuating to mean basal stresses during flow passage and the distinctive behavior of the coarse, unsaturated flow front, imply that flow style may be a primary control on the conversion of translational to vibrational kinetic energy. This conversion ultimately controls the radiation of high‐frequency seismic waves. Thus, flow style may provide the key to revealing the nature of the relationship between fluctuating forces and other flow properties

Measuring Basal Force Fluctuations of Debris Flows Using Seismic Recordings and Empirical Green's Functions

We present a novel method for measuring the fluctuating basal normal and shear stresses of debris flows by using along‐channel seismic recordings. Our method couples a simple parameterization of a debris flow as a seismic source with direct measurements of seismic path effects using empirical Green's functions generated with a force hammer. We test this method using two large‐scale (8 and 10 m³) experimental flows at the U.S. Geological Survey debris‐flow flume that were recorded by dozens of three‐component seismic sensors. The seismically derived basal stress fluctuations compare well in amplitude and timing to independent force plate measurements within the valid frequency range (15–50 Hz). We show that although the high‐frequency seismic signals provide band‐limited forcing information, there are systematic relations between the fluctuating stresses and independently measured flow properties, especially mean basal shear stress and flow thickness. However, none of the relationships are simple, and since the flow properties also correlate with one another, we cannot isolate a single factor that relates in a simple way to the fluctuating forces. Nevertheless, our observations, most notably the gradually declining ratio of fluctuating to mean basal stresses during flow passage and the distinctive behavior of the coarse, unsaturated flow front, imply that flow style may be a primary control on the conversion of translational to vibrational kinetic energy. This conversion ultimately controls the radiation of high‐frequency seismic waves. Thus, flow style may provide the key to revealing the nature of the relationship between fluctuating forces and other flow properties

Continuum viscoplastic simulation of a granular column collapse on large slopes: μ(I) rheology and lateral wall effects

We simulate here dry granular flows resulting from the collapse of granular columns on an inclined channel (up to 22°) and compare precisely the results with laboratory experiments. Incompressibility is assumed despite the dilatancy observed in the experiments (up to 10%). The 2-D model is based on the so-called μ(I) rheology that induces a Drucker-Prager yield stress and a variable viscosity. A nonlinear Coulomb friction term, representing the friction on the lateral walls of the channel, is added to the model. We demonstrate that this term is crucial to accurately reproduce granular collapses on slopes ≳10°, whereas it remains of little effect on the horizontal slope. Quantitative comparison between the experimental and numerical changes with time of the thickness profiles and front velocity makes it possible to strongly constrain the rheology. In particular, we show that the use of a variable or a constant viscosity does not change significantly the results provided that these viscosities are of the same order. However, only a fine tuning of the constant viscosity (η=1 Pa s) makes it possible to predict the slow propagation phase observed experimentally at large slopes. Finally, we observed that small-scale instabilities develop when refining the mesh (also called ill-posed behavior, characterized in the work of Barker et al. [“Well-posed and ill-posed behaviour of the μ(I)-rheology for granular flow,” J. Fluid Mech. 779, 794–818 (2015)] and in the present work) associated with the mechanical model. The velocity field becomes stratified and the bands of high velocity gradient appear. These model instabilities are not avoided by using variable viscosity models such as the μ(I) rheology. However we show that the velocity range, the static-flowing transition, and the thickness profiles are almost not affected by them

A physical model of the high-frequency seismic signal generated by debris flows

We propose a physical model for the high‐frequency (>1 Hz) spectral distribution of seismic power generated by debris flows. The modeled debris flow is assumed to have four regions where the impact rate and impulses are controlled by different mechanisms: the flow body, a coarser‐grained snout, a snout lip where particles fall from the snout on the bed, and a dilute front composed of saltating particles. We calculate the seismic power produced by this impact model in two end‐member scenarios, a thin‐flow and thick‐flow limit, which assume that the ratio of grain sizes to flow thicknesses are either near unity or much less than unity. The thin‐flow limit is more appropriate for boulder‐rich flows that are most likely to generate large seismic signals. As a flow passes a seismic station, the rise phase of the seismic amplitude is generated primarily by the snout while the decay phase is generated first by the snout and then the main flow body. The lip and saltating front generate a negligible seismic signal. When ground properties are known, seismic power depends most strongly on both particle diameter and average flow speed cubed, and also depends on length and width of the flow. The effective particle diameter for producing seismic power is substantially higher than the median grain size and close to the 73rd percentile for a realistic grain size distribution. We discuss how the model can be used to estimate effective particle diameter and average flow speed from an integrated measure of seismic power